Wall and Ceiling Mount For Epson Projectors
These models have been tested specifically with our mounts:
3300, 1700c, 1705c, 1710c, 1715c, 61P, 62c, 8100s, 82C, Cinema 400, Cinema 550, Cinema 800, Cinema 800 HQV, Cinema 810, Cinema 810 HQV, CinemaPro 800, ELP3000, ELP5100, EMP5000, EMP500c, EMP503C, EMP505c, EMP5300, EMP5350, EMP5600, EMP600p, EMP61, EMP7000, EMP700c, EMP703c, EMP7100, EMP710c, EMP713C, EMP715c, EMP7200, EMP7250, EMP7300, EMP7350, EMP737C, EMP740c, EMP745c, EMP7600, EMP7700p, EMP7800P, EMP7850p, EMP7900p, EMP8000i, EMP8000NL, EMP81, EMP810, EMP8100i, EMP811p, EMP8150i, EMP8200i, EMP820p, EMP830p, EMP835p, EMP9000i, EMP9100i, EMPTS10, EMPTW100, EMPTW20, EMP-TW20, EMP-TW600, EMPX3, EMP-X3, Home 20, Powerlight 7000, PowerLite 1700c, PowerLite 1705c, PowerLite 1710c, PowerLite 1715c, Powerlite 30c, Powerlite 5000, Powerlite 51c, Powerlite 52c, Powerlite 53c, PowerLite 54c, Powerlite 5550C, POWERLITE 62C, Powerlite 70c, Powerlite 71c, Powerlite 73c, PowerLite 74c, PowerLite 750c, Powerlite 7550C, PowerLite 755c, PowerLite 760c, PowerLite 765c, PowerLite 76c, PowerLite 76C, Powerlite 81c, PowerLite 81p?, Powerlite 821p, PowerLite 821p, PowerLite 82C, PowerLite 830p, PowerLite 835p, Powerlite Cinema 200, Powerlite Cinema 500, PowerLite Cinema 800, PowerLite Home 10, PowerLite Home 20, Powerlite S1, Powerlite S1+, Powerlite S3, Powerlite S4, PowerLite S5
NEW 2011! We have tested and recommend our NPL, LFM mount for Epson PowerLite Home Cinema 8100, 8350, 8500 (UB) and 8700 (UB).
If your projector is not listed as a compatible model, it does not mean the mount will not work. Here are some ways to find out.
Necessities for ceiling mounting:
- The projector must be able to flip the image upside down. When mounted, the projector is upside down.
- The projector must have 3 or 4 threaded holes on the bottom, the hole diameter could vary from 2.5mm (about 1/10 inch) to 6mm (about 1/4 inch). The maximum spread of the holes cannot exceed 18.5 inches.
- 99% of the projectors between 3LB to 20 LB should work. Normally projectors > 20 LB have too big of an outer case for this mount.
|
|
