These models have been tested specifically with our mounts:
Domino 18, Domino 20, Domino 20H, Domino 30, Domino 30H, EVSX1, Grand Cinema C3X, HT280, HT300 E, HT300 ELINK, SDV 100 Premier
SLC 650X, SLCHB1
If your projector is not listed as a compatible model, it does not mean the mount will not work. Here are some ways to find out.
Necessities for ceiling mounting:
The projector must be able to flip the image upside down. When mounted, the projector is upside down.
The projector must have 3 or 4 threaded holes on the bottom, the hole diameter could vary from 2.5mm (about 1/10 inch) to 6mm (about 1/4 inch). The maximum spread of the holes cannot exceed 18.5 inches.
99% of the projectors between 3LB to 20 LB should work. Normally projectors > 20 LB have too big of an outer case for this mount.
MountDirect.com
4124 Walney Road Suite D Chantilly, VA, 20151