• Heavier gauge steel. 
• Silver or Black epoxy power coating
• Universally fit 99% of the TVs 32" ~ 60" (not work with Most Philips TVs, nor VESA 800x400)
• Quick and easy installation with all mounting hardware included
• TV is 3" ~ 23" from the wall
• Up to +/- 50º Tilt side to side
• Tilt -5º ~ 15º (15 degree tilt down)
• Roll -6º ~  +6º (adjust horizontal level)
• Maximum TV Weight: 175 lb / 79.38 kg
• Meant for two 16" center studs

Compatible information:

1. Make sure TV is larger than 31.5" (width) x 18.5" (height without pedestal), or all TVs 32" and larger will be definitely fine. Otherwise mount will stretch out.
2. The mounting holes at the back of the TV could be limited in a 27.5" (width) x 17.75" (height) rectangle.

Or

1. If the TV is 32" or larger, and the TV is compatible with following VESA standards, then it will definitely work.

                     

MIS-E	200 mm x 100 mm
MIS-F	200 mm x 200 mm 400 mm x 400 mm 600 mm x 200 mm 600 mm x 400 mm 280 mm x 150 mm 800 mm x 400 mm (not work)

Pictures: