Great bracket, great price as long as your not going to feed a molded VGA cable through the pipe. The square cut-out in the tilt adjustment plate is just 1/8" too small, so you'll need to take the bracket apart to feed the cables through the sides. I bought over 50 pieces and no real problems. I still order more.
Modification on the newer mounts are making it difficult to thread in gas pipe. You may need to add a coupling to the bracket nipple before adding more pipe. Smaller washers for the 4mm screws would be nice.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Angel Serrano
December 21, 2011
Reviewer:
ANGEL SERRANO from SAUGUS, MA United States
i heve purches the projector mount and like the way that it look i have fan puthing it together i was the best shoises for my projector i recomended to any one go and get it forme mount direct im haooy wed it i love it ..........
Was this review helpful to you?
2 of 2 people found the following review helpful:
Poor
June 8, 2011
Reviewer:
No Way from Kentucky, NE United States
1. For an epson 8350, the screws provided are not a perfect fit.
2. For the screws that kinda fit, they are either too long (requiring you to buy a washer/nut to make up the difference) or too short (requiring another washer purchase because the head of the screw almost falls through the hole of the arms of the mount
3. The instructions tell you to screw in the ceiling mount wood screws (part1). Yeah, I'd love to except you gave me A BOLT!
4. The aforementioned bolt is not a standard size (much like the screws in #1), it seems to be just slightly too small for a suitable wrench head that you'd use to drill it in.
Generally, this product doesn't seem to be measured for USA standards of drill sizes etc. Everything's a bit too small or a bit too big, requiring jerry-rigging all the way through the wretched instructions. Take the screws to home depot and see if they perfectly fit into their display of standard metric/american screw sizes. You get what you pay for.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Great Mount for the Money
April 17, 2011
Reviewer:
Paul T. from Gainesville, VA United States
This mount was perfect for my Epson Powerlite 8350. Installed in minutes (hardest part was finding the ceiling joists to attach to). Very solid and nice looking unit for a fraction of the cost of others I viewed. Unit looks professionally installed.
Was this review helpful to you?
3 of 3 people found the following review helpful:
NPL Ceiling Mount
September 3, 2010
Reviewer:
Kenneth DiMiaio from Cpae may court House, NJ United States
This is a great universal mount. The best thing about it, is the fact that the threads are a standard 1.5" I needed to extend the projector 3 feet and all I did is go down to my local Home Depot and pick a scrap piece of 1.5 gas pipe, ask the guy to thread it and I had any size extention for $5.00. Thats better than the $29.00 for an 18" extension thats sold as an accessory. I could have any size cut for that $5 to 10 price...